Page 14 - 2026 HuFriedyGroup Digital Catalog

Accutron™ Digital Ultra™ Flushmount Flowmeter, 56800-CHAIR

7 1/2" (19,05 cm)

4X "A" THRU ALL
A=5/64" (0,20 cm)
3 1/4" FLOWMETER 3 7/8" FOR #8 FLATHEAD
(8,26 cm) CUTOUT (9,84 cm) WOOD SCREW
A=3/16" (0,48 cm)
FOR #8 FLAT HEAD
4X R 1/8" (0,32 cm) MACHINE WOOD SCREW
8 1/8" (20,96 cm)
1 In advance of construction:
a) Provide for tubing chase from
flowmeter location to chair J-Box .
b) Install Vacuum, Oxygen, and Nitrous
Oxide risers .
2 Installation:

a) Ensure cut-outs for the flowmeter and
oxygen outlet are
located correctly .
b) Mount Control Module Bracket, with long slot down . Feed cable
through the slot . Connect cable to controller and press controller
into bracket . Make sure cable is not pinched . To remove controller
from the bracket, insert screwdriver into slot at bottom corner of
controller and pry outward .
c) Pull the Mixed Gas and Vacuum lines up to the Remote Flow System
mounting location on the chair .
d) Install Remote Flow System to chair .
(Requires purchase of brand-specific Chairmount Kit) .
e) Complete connections of all hoses .

Accutron™ Digital Ultra Flushmount Flowmeter with RFS Mounted in Cabinet
™
™
Bracket is
included with
flowmeter.

(9.16" (23.27 cm) L x 4.26" (10.82 cm) H)
Control
Module
with
Bracket

Digital
RFS™ Remote
Flow System
25 20 15 10 5 in Hg
30
VACUUM

Nitrous Oxide
Check Valve Riser
Oxygen
Check Valve Riser
In-cabinet illustrations are specific to 56800 Digital Ultra™
Flushmount with RFS™ Remote Flow System Vacuum Controller. All templates are not to scale .
12